Rotate the flywheel counter-clockwise using a socket on the crankshaft nut. Align the "T" mark on the flywheel with the index notch on the crankcase.
Hope this helps someone getting their bike ready for the season! If anyone has a backup of the parts catalog, please drop it in the comments.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Stuff a clean rag into the open crankcase mouth to prevent loose parts from falling inside. Remove one of the piston pin circlips using needle-nose pliers. Push the wrist pin out and remove the piston. Inspection and Reassembly 152fmh engine service manual
SAE 10W-40 for general climates. Use 15W-50 for extreme heat or 5W-30 for freezing temperatures.
To help you get exactly what you need for your repair project, could you tell me your engine is having right now? If you are doing a full rebuild, Share public link
This comprehensive service guide provides the technical specifications, maintenance schedules, and step-by-step repair procedures you need to keep your 152FMH engine running flawlessly. 1. Engine Specifications and Fluid Capacities Rotate the flywheel counter-clockwise using a socket on
| Maintenance Item | Every Ride (Pre-ride Check) | After 1st 300 mi (500 km) / Break-in | Every 600 mi (1,000 km) or 3 months | Every 1,200 mi (2,000 km) or 6 months | | :--- | :--- | :--- | :--- | :--- | | | Check level | Change | Change | Change | | Valve Clearance | | Check/adjust | | Check/adjust | | Spark Plug | | Check condition/gap | Replace | Check condition/gap | | Air Filter | | Clean/Replace | Clean/Replace | Replace | | Carburetor | | Check idle speed/mixture | Check/adjust | Clean/rebuild | | Drive Chain | Check tension/lube | Check/adjust/lube | Check/adjust/lube | Replace if worn | | Fasteners | Check for looseness | Check/tighten | Check/tighten | Check/tighten |
Detailed instructions for removing the cylinder head, camshaft, and piston.
Disconnect the fuel line, choke cable, and throttle slide assembly. Unbolt the carburetor from the intake manifold. If anyone has a backup of the parts
Wet multi-plate (Available in Automatic, Semi-Automatic, or Manual configurations) Transmission: 4-speed (usually N-1-2-3-4 or 1-N-2-3-4) Fluid Capacities Engine Oil Capacity: 0.8 Liters (approx. 0.85 US quarts)
(Invoking related search-term suggestions.)