Proceq Profometer | 4 Manual

Switch the probe orientation. Scan parallel to one set of bars to map out individual transverse cross-bars.

The dedicates a full diagram to labeling the hardware. Familiarize yourself with these components:

has capabilities to store data, which can be exported to a PC for analysis. Although the Profometer 4

Before taking measurements, the device must be calibrated to the specific probe being used. proceq profometer 4 manual

Read the concrete cover depth directly from the corresponding scale on the analog display.

The is a second-generation, non-destructive test instrument designed by Proceq (now part of Screening Eagle Technologies) for locating reinforcing bars (rebar), measuring concrete cover depth, and estimating bar diameter. It is widely regarded as a robust, "workhorse" tool in the construction and civil engineering industries due to its simplicity and reliability.

Proceq Profometer 4 Go to product viewer dialog for this item. Switch the probe orientation

: Specific area of the structure tested and the date of inspection.

Place the search head on the calibration test block to confirm the unit reads the block’s specified depth within the manual's allowable tolerance ( ±1plus or minus 1 Step 2: Locating Reinforcing Bars

The Profometer 4 was followed by newer generations, such as the Profometer 5, which introduced several key improvements: such as the Profometer 5

: Continuous measurement along a path to identify rebar distribution. Section 4: Data Analysis & Results

Turn on the indicating unit and allow it to warm up for one minute.

If you find the Profometer 4 limited for your current projects, modern equivalents like the Profometer 600 offer: High-resolution color touchscreens. Internal memory for 2D cross-line scans.