Narishige Pc10 Manual New

The Narishige PC-10 has a wide range of applications in various fields, including:

Use the provided hex wrench to loosen the small terminal screws holding the old coil in place.

The is a dual-stage, vertical-pull micropipette puller designed for high-precision laboratory tasks such as patch-clamping and microinjection. Mastering the latest operational protocols ensures consistent pipette geometry and extends the life of your heating filament. Key Features and Specifications

Slide a clean glass capillary vertically through the heating coil. narishige pc10 manual new

This guide serves as a detailed manual supplement for new users or those seeking a refresher on the operation, theory, and maintenance of the Narishige PC-10.

Wear safety glasses when breaking or snapping glass capillaries during loading and post-pull inspections. 2. Component Identification and Controls

: The setup is faster, and the digital display now provides clearer status updates, including the elapsed time from start to finish. The Narishige PC-10 has a wide range of

(often referred to as a manual or vertical puller) is its , which significantly improves the reproducibility of specialized pipette tips.

Here are the key technical specifications for the Narishige PC-10, compiled from various sources:

Pulls the glass capillary in one continuous motion. This mode typically produces larger tip diameters or more "supple" pipettes. Key Features and Specifications Slide a clean glass

The original PC-10 manual included a table correlating dial settings (e.g., 45–55 for 1mm borosilicate) to expected tip resistance (in MΩ). Without this table, you are guessing.

Raise the lower slider assembly until it meets the bottom of the capillary, then tighten the lower clamp. The capillary should now support the weight of the lower slider. Step 3: Setting the Pull Values

Wipe the vertical guide shafts weekly using a lint-free cloth moistened with isopropyl alcohol.

Over time, heating and cooling will distort the coil geometry. Inspect it weekly to ensure it remains a perfect circle centered around the capillary path.