Foxconn N15235 Motherboard Front Panel Connectors Link -

Pin 1 is the top-left pin (next to the missing pin gap). Pins increase left to right on the top row, then left to right on the bottom row.

After cross-referencing OEM manuals from Acer Aspire M3800, M5810, and eMachines ET1830 series, the definitive pinout for the is as follows:

For most versions of this board (including common G31 and G41 variants), the standard 9-pin layout follows this configuration: Pin Location Header Label Polarity Matter? Pins 1 & 3 PWR-LED Power LED (Indicator light) Yes (+ is Pin 1) Pins 5 & 7 PWR-SW Power Switch (Button) Bottom Row (Pins 2-10) Pins 2 & 4 HDD-LED Hard Drive Activity LED Yes (+ is Pin 2) Pins 6 & 8 RESET-SW Reset Switch (Button) EMPTY No Pin (Key) Detailed Installation Steps foxconn n15235 motherboard front panel connectors

Follow this detailed guide to connect your front panel wires.

The header consists of two rows of pins. The top right pin is usually missing to act as a key for orientation. Pins (Top Row) Pins (Bottom Row) Polarity Matters? Pins 1 (+) & 3 (-) Yes Power LED (PLED) Pins 2 (+) & 4 (-) Yes Reset Switch (RESET) Pins 5 & 7 Power Switch (PWRSW) Pins 6 & 8 Unused/NC Pin 10 (Empty) Connection Steps Pin 1 is the top-left pin (next to the missing pin gap)

If the above doesn’t match, try this common Intel/Foxconn OEM layout (same header but different order):

The pinout for the FP1 header is well-documented. The diagram below is based on multiple user forums and manuals. It's the most accurate representation you'll find online. Pins 1 & 3 PWR-LED Power LED (Indicator

The front panel header on this motherboard is typically labeled . You can find it on the bottom-right edge of the motherboard. It is a 9-pin block of male pins (arranged as 2x5 with one pin missing). 2. Pinout Configuration for FP1