Civil 3d: Subassembly Composer Tutorial Pdf Work
If (Fill): Divert the flowchart to build an embankment slope.
Navigate to the tab at the bottom of the screen. Create the following parameters: GutterWidth (Type: Double, Default: 0.50m / 1.5ft) CurbHeight (Type: Double, Default: 0.15m / 0.5ft) CurbWidth (Type: Double, Default: 0.15m / 0.5ft) GutterSlope (Type: Slope, Default: -2.0%) Step 2: Establish the Origin Point (P1)
Check the box to . Assign the code "Subgrade" or "Gutter" to L1 . Step 4: Build the Curb Face (P3 and L2) Drag another Point below P2 . This creates P3 and L2 . Set Point Construction Type to Delta X and Delta Y . Set Delta X to 0 . Set Delta Y to CurbHeight . civil 3d subassembly composer tutorial pdf
+--------------------------------------------------------------+ | Toolbox | +---------------+------------------------------+---------------+ | | | | | | Flowchart | | | | | Preview | | Input / | | Window | | Output +------------------------------+ | | Parameters | | | | | Properties | | | | | | +---------------+------------------------------+---------------+ Core Building Blocks of SAC
Subassembly must follow a gutter alignment or a ditch profile. If (Fill): Divert the flowchart to build an embankment slope
: A structured training manual from the Florida Department of Transportation that provides step-by-step exercises for creating fixed and conditional geometry.
: Shapes define areas for material quantity takeoffs (QTO). Assign the code "Subgrade" or "Gutter" to L1
+-------------------------------------------------------+ | Toolbox | Flowchart | | (Geometry, Advanced) | (Logical sequence of | | | Points, Links, Shapes) | +-------------------------+-----------------------------+ | Settings & Parameters | Preview | | (Packet, Input/Output, | (Visualizes geometry and | | Target Parameters) | tests target changes) | +-------------------------------------------------------+ | Output Window | +-------------------------------------------------------+ The Four Essential Panels
Drag a Link from the Tool Box and attach it to P2. In its Properties, set "Type" to "Surface." Under "Link Geometry Properties," set "Point" to P2 , "Slope" to your SideSlope parameter, and "Target Surface" to TargetSurface , which you must add as a target parameter. This link will project from the pavement edge at the specified slope until it hits your target surface.
SAC files (.pkt) are version-sensitive. Note which version of Civil 3D the tutorial is built for.
Forces a point to stretch horizontally to follow a specific alignment, feature line, or survey figure.