Dpi Get Info Error Ps4 Link

Sony’s official Content Manager Assistant for PC is notoriously sensitive to version mismatches. If your PS4 system software is updated (e.g., 11.00 or later) but your CMA is from 2018, the DPI protocol will throw an error.

The "get info" part of the error frequently means the client device is sending a request, but the PS4's response is dropped by your router's firewall. Both devices must be on the exact same network frequency and subnet.

If none of the above work, your PS4’s internal HDD may have physical damage causing DPI read errors.

: Start by rebooting the PS4 and restarting the DPI application on your PC. Many community members report that a fresh boot clears temporary cache issues.

If you are using a capture card, try Remote Play instead (or vice versa). The error might be specific to the physical chipset of your current hardware.

Sometimes, the error occurs because your network can't handle the default video quality settings. Reducing these can help:

Locate the and enter the PS4’s static IP. This allows the PS4 to communicate without the router "inspecting" every packet. 4. Rebuild the PS4 Database

A: A factory reset should be a last resort. It can resolve deep software corruption, but it will also erase all your data. Exhaust all other troubleshooting steps first.

A full power cycle clears temporary system caches and resets the hardware communication protocols.

If the error persists, open your Settings.ini file in the DPI folder and set ShowError=True . This will generate a DPIServer.log file which can help pinpoint specific network blocks.

The "DPI Get Info Error" on PS4 is almost always a By ensuring your firmware is current and removing network "inspections" via DMZ or Port Forwarding, you can usually clear the path for a successful link.

If you’re using an unofficial tool like or “PS4 Link,” check its logs. The error may be cosmetic. Try the official PS Remote Play app from Sony first.