Update Xiaomi Mi Wifi Range Extender Pro Updated Better Jun 2026

Navigate to 'General Settings' or click on the device's main dashboard. Firmware Upgrade: Look for the 'Firmware Upgrade' option.

You must perform a hard factory reset. Take a pin or SIM ejector tool and press down on the Reset button located in the small hole at the bottom of the extender. Hold it for 5 to 10 seconds until the light turns off and starts blinking yellow. Open the Mi Home app, delete the old profile of the extender, and set it up as a completely new device. Tips to Maintain Extender Performance After an Update

To ensure a smooth and trouble-free update, follow these critical steps.

Is your extender currently (yellow, flashing blue, solid blue)?

: Tap the three dots icon in the top right corner of the device management page. update xiaomi mi wifi range extender pro updated

Make sure the smartphone running the management app has at least 50% battery.

Updating your Xiaomi Mi WiFi Range Extender Pro is a straightforward process:

There are two primary ways to update your Xiaomi extender: via the (easiest) or through the Web Management Panel (advanced). Method 1: Using the Mi Home App (Recommended)

Move your extender closer to the router. Force-close the Xiaomi Home app, clear the app cache in your phone settings, restart the app, and try again. App Cannot Find the Extender Navigate to 'General Settings' or click on the

To avoid manually checking, you can enable automatic firmware updates within the Mi Home app settings. The extender will update between 2:00-6:00 a.m. without notifying you. Troubleshooting: What to Do If the Update Fails If your extender fails to update, try the following steps:

The LED indicator on the physical extender will change color (usually flashing yellow or blue).

Position it halfway between your main router and the area with poor coverage. It should be close enough to receive a strong signal (blue light), but far enough to reach the dead zone.

: Open a browser on a connected device, enter the IP, and log in with your administrator password. Take a pin or SIM ejector tool and

He yanked it from the socket. The house went silent. The “ECHO” network vanished.

If your extender frequently disconnects, has trouble connecting to 2.4GHz networks, or becomes unresponsive, a firmware update often resolves these issues.

Enter the found on the sticker at the bottom of the device (typically 192.168.31.1 or miwifi.com ) into your browser. Log in with your administrator password. Navigate to Settings > Status .