: Remove the float bowl. Unscrew the main jet and pilot jet. Spray them with carburetor cleaner and blow them out with compressed air to clear any varnished fuel blockages.
Inspect the drain plug O-ring or crush washer. Replace if damaged. Reinstall the drain plug and torque to 22 Nm.
Remove the plug, sealing washer, and internal oil screen filter. hb atv 125 service manual
Inspect tires for cuts and pressure, check for loose hardware/fasteners, and inspect the carburetor.
Here is a review of the .
Park the vehicle on a level surface and turn off the engine. Place an oil catch pan beneath the engine crankcase.
Typically set at 1.5 to 2 full turns out from the fully closed position. If the engine bogs down during acceleration, fine-tune this screw in 1/4-turn increments. 4. Drive Chain Tension & Alignment : Remove the float bowl
Test the stator output using a multimeter set to AC Voltage. While cranking, the (stator power) should output at least 50V AC, and the Blue/White wire (trigger/pickup coil) should pulse around 1V to 2V AC. Battery & Charging System
Reinstall the screen, spring, washer, and drain plug. Torque to . Remove the dipstick on the right side of the engine. Pour in 0.8L of fresh SAE 10W-40 4-stroke ATV oil. Inspect the drain plug O-ring or crush washer
The is a popular choice for off-road enthusiasts, known for its rugged design and reliable 125cc engine. Whether you own the HB ATV 125cc Utility model or a sport variation, proper maintenance is key to ensuring longevity and safety. The Service Manual is the most critical tool for any owner looking to perform their own repairs or scheduled maintenance.