Sharp Atomic Clock Spc373 User Manual Verified

Press and release the button on the back of the clock.

When the alarm sounds, press the large button on top of the clock.

: Press the ALM ON/OFF button to enter Alarm 1 or Alarm 2 mode. Press and hold ALM ON/OFF until the hour flashes, adjust with UP/DOWN , and press again to set minutes.

Once the batteries are in, the clock will automatically begin searching for the Atomic Signal (RCC). You will see the "Tower" icon flashing.

You can view the complete button functions and warranty details there if you require the exact verbiage from the manufacturer. sharp atomic clock spc373 user manual

The Sharp SPC373 updates its internal timekeeping daily by listening for the WWVB radio signal.

button again to move to the next setting (Year, Month, Date) and once more to exit. cdn.prod.website-files.com Alarm Functions : Press and hold the button until the alarm time flashes. Use the buttons to adjust, then press Toggle Alarm ALARM ON/OFF switch or button to activate the bell icon on the display. : Press the large SNOOZE/LIGHT button on top to silence the alarm for 5–9 minutes. Troubleshooting

This is almost always a setting issue. Refer to Section 2 to ensure you have selected the correct zone (P, M, C, or E). The atomic icon is missing or flashing.

Press the ▲ button once.

Note: It can take anywhere from 5 minutes to 24 hours for the clock to successfully register the signal for the first time. Manual Settings and Adjustments

Press and hold the button (or SET button, depending on the production run) until the display flashes.

To ensure proper signal calibration, follow these steps exactly when first powering on your clock:

For additional assistance, you can contact the manufacturer, , at 1-800-221-0131 . Sharp atomic clock spc373 Press and release the button on the back of the clock

Ultimate Guide to the Sharp Atomic Clock SPC373 User Manual The Sharp SPC373 Atomic Desktop Clock is a highly accurate, self-setting timepiece featuring a digital calendar, indoor temperature display, and blue backlight. This comprehensive guide serves as your complete user manual, troubleshooting assistant, and feature walkthrough. 🧭 Initial Setup and Battery Installation

: Press the °C/°F button to switch between Celsius and Fahrenheit.

The Sharp Atomic Clock SPC373 has a single alarm function. To set the alarm: