The or operating system type (Traditional or IP-OS)
These basic environmental, file management, and status checking commands help verify the health of the physical chassis. Environmental and Power Checks show temperature show version Use code with caution.
exit : Exits the current sub-context or closes the CLI session entirely. ericsson mini link cli commands
A key feature of the MINI-LINK CLI is the function. When this is enabled, most configuration changes are temporary. If the changes are not saved with the write mem command within 15 minutes, the system automatically reverts to its previous state, preventing accidental misconfigurations from locking you out of the device.
Enter Global Configuration mode using configure terminal to modify system settings. : Used to configure management IP settings. The or operating system type (Traditional or IP-OS)
list : Displays all available CLI commands in the current mode.
When a hop drops traffic or experiences high bit error rates (BER), use these diagnostic commands. Alarm Management A key feature of the MINI-LINK CLI is the function
set radio transmitter [on/off] : Toggles the RF signal emission. Essential to turn off during installation safety checks or loopback tests.
show continuous-wave — Used during alignment to track real-time RX signal strength. Adjusting Radio Settings