Id6100 Danieli Manual Hot Jun 2026

has been widely used, some distributors note it has been in favor of newer models in the ID6000+ series. AI responses may include mistakes. Learn more

Access the internal potentiometer or manual control dials to set the thermal threshold. This calibrates the sensor to ignore secondary radiating scale or cooled metal edges, focusing only on the true hot core of the product. Operational Maintenance and Troubleshooting

To deploy the Danieli ID6100 safely, mill technicians must strictly execute manual mounting and electrical calibration processes. 1. Mechanical Alignment and Optical Positioning

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. ID6100 Heat Detector by DANIELI AUTOMATION id6100 danieli manual hot

Regular maintenance of laser gauge detectors and pyrometers.

: Provides signals proportional to the material's exact position or width, often used for center-line offset monitoring on transport tables .

: Flips to a high state the millisecond hot metal enters the field of view (material tracking). has been widely used, some distributors note it

[ID6100 Scanner Positioned Above Roll Table] | \ | \ Optical Field of View (830-1000mm) v \ ================================================= [================= HOT STRIP / WIRE =============] --> (Rolling Direction) ================================================= ---------------- Roller Table Line -------------- Mounting Location Suspend the Go to product viewer dialog for this item.

: It uses a line CCD camera and an infrared filter to focus heat emissions from hot bodies (typically at temperatures of 750°C or higher) onto a photo sensor . Outputs : Digital Output : Triggered by the presence of material .

Its optical system is composed of a filter and an aspherical lens that focuses the infrared emission from the rolled material onto a . The position of the hot steel within the detector's field of view is converted into an analog signal. This calibrates the sensor to ignore secondary radiating

For the official instruction or maintenance manual, you can access technical documentation through the following channels:

The technical documentation outlines the operational parameters for several key components. Understanding these is essential for operators and maintenance technicians. A. Reheating Furnace