Stop immediately. Do not ignore the warning. Connect the device to a 5V/2A USB wall charger and wait until the battery indicator shows at least 75%. Then restart the update process from scratch.
Used to update the component testing logic. The device is recognized as a drive named "MM BOOT" . Step-by-Step Firmware Update Procedure The following process is verified for Windows 10 or above. Preparation:
If your DSOTC2 device stores configuration settings, back them up.
If you can provide the exact brand (e.g., FNIRSI) or a picture of the device's main menu, I can give you specific links or commands.
Before proceeding, it's important to note that the information in this guide primarily applies to the of digital storage oscilloscopes (DSOs). This series includes the DSO2C10 , DSO2C15 , DSO2D10 , and DSO2D15 models. The "C" and "D" in the model number generally denote different feature sets, with "D" models often including a built-in signal generator.
Check for firmware updates every 3-6 months, or whenever you encounter issues with your device's performance.
: Use a high-quality data cable to connect the device to your computer.
Some versions support updating over USB using STM32 CubeProgrammer or Flash Loader Demonstrator:
Charging-only cables will not allow the computer to see the device as a drive. Avoid interruption:
Stop immediately. Do not ignore the warning. Connect the device to a 5V/2A USB wall charger and wait until the battery indicator shows at least 75%. Then restart the update process from scratch.
Used to update the component testing logic. The device is recognized as a drive named "MM BOOT" . Step-by-Step Firmware Update Procedure The following process is verified for Windows 10 or above. Preparation:
If your DSOTC2 device stores configuration settings, back them up. dsotc2 firmware upd
If you can provide the exact brand (e.g., FNIRSI) or a picture of the device's main menu, I can give you specific links or commands.
Before proceeding, it's important to note that the information in this guide primarily applies to the of digital storage oscilloscopes (DSOs). This series includes the DSO2C10 , DSO2C15 , DSO2D10 , and DSO2D15 models. The "C" and "D" in the model number generally denote different feature sets, with "D" models often including a built-in signal generator. Stop immediately
Check for firmware updates every 3-6 months, or whenever you encounter issues with your device's performance.
: Use a high-quality data cable to connect the device to your computer. Then restart the update process from scratch
Some versions support updating over USB using STM32 CubeProgrammer or Flash Loader Demonstrator:
Charging-only cables will not allow the computer to see the device as a drive. Avoid interruption: