Xinje Plc Usb Driver Install Jun 2026

Before attempting to install the driver, ensure you have the following:

If the automatic executable fails to register the driver, or if your PC still does not recognize the PLC, you must map the driver manually using the Device Manager. Step 1: Connect the PLC Power on your Xinje PLC.

Look through the hardware list. You will likely see a yellow exclamation mark next to a device labeled or "Xinje PLC" under the Other devices or Universal Serial Bus controllers section. Step 3: Update Driver Software

Once the driver is installed, you must configure the communication port within the Xinje software , as shown in this tutorial on connecting a Xinje PLC to a PC . Open or XC Pro Setup . Go to Connection Options or Software Serial Config . xinje plc usb driver install

The driver is not a separate download but is integrated into Xinje's programming software suite. Follow these steps to obtain it:

Locate the device (often under "Other devices" or "Ports"). Right-click it and select Update driver Browse Local Files: Browse my computer for drivers

Once you have a successful , follow these best practices to maintain reliability: Before attempting to install the driver, ensure you

The easiest way to install the driver is through the official Xinje programming software package. Step 1: Locate the Driver Folder

To help narrow down any remaining connection issues, let me know: What of Xinje PLC are you using? Which version of Windows is installed on your PC?

: Always cut off external power before performing initial wiring or connecting expansion modules. You will likely see a yellow exclamation mark

Right-click the unrecognized Xinje device and select . Choose the option: Browse my computer for drivers .

If the automatic installer fails, or if Windows labels your PLC as an "Unknown Device," you must point Device Manager directly to the driver files. Step 1: Connect the PLC Power on your Xinje PLC using an appropriate power supply.

Unplug the USB cable from your PC before starting the installation to avoid "unidentified device" errors. Run the Installer: Right-click the driver installer ( ) and select "Run as Administrator." The "Success" Check:

Ensure no other software (like a virtual machine or another PLC programming tool) is currently occupying the assigned COM port.

Open your XDPPro or XD-Config software, go to the communication configuration settings, match the connection type to or the correct COM Port , and click Communication Test to confirm connection. Troubleshooting Common Errors