Mount the wired bracket onto the handlebars or stem. Ensure it is secure. Position the computer display so it is easily readable while riding 1.2.1 . Step 2: Install the Sensor (Fork Pickup)
Test that the magnet passes the sensor within 1–3mm without hitting it. Secure the wire with tape or zip ties. 3. Initial Setup: Wheel Size & Settings
Once the wheel size is set, the J7 will usually prompt you to choose between (Kilometers) or MPH (Miles). 3. Standard Tire Size Chart
Activate the backlight to view data in low light.
: The screen will flash KM/H or M/H . Press the MODE button (front button) to toggle, then press SET to confirm.
Place your bike on a flat surface with the valve stem at the bottom (6 o'clock position). Mark the ground at the valve stem.
Advance through the flashing digits using the to change values and the Left button to skip forward. If starting fresh, leave this value at 0000.0 . Step 4: Set the Clock (CLK)
Echo J7 Cycle Computer Manual | [work]
Mount the wired bracket onto the handlebars or stem. Ensure it is secure. Position the computer display so it is easily readable while riding 1.2.1 . Step 2: Install the Sensor (Fork Pickup)
Test that the magnet passes the sensor within 1–3mm without hitting it. Secure the wire with tape or zip ties. 3. Initial Setup: Wheel Size & Settings echo j7 cycle computer manual
Once the wheel size is set, the J7 will usually prompt you to choose between (Kilometers) or MPH (Miles). 3. Standard Tire Size Chart Mount the wired bracket onto the handlebars or stem
Activate the backlight to view data in low light. Step 2: Install the Sensor (Fork Pickup) Test
: The screen will flash KM/H or M/H . Press the MODE button (front button) to toggle, then press SET to confirm.
Place your bike on a flat surface with the valve stem at the bottom (6 o'clock position). Mark the ground at the valve stem.
Advance through the flashing digits using the to change values and the Left button to skip forward. If starting fresh, leave this value at 0000.0 . Step 4: Set the Clock (CLK)