Bush Bdvd 8310 User Manual //top\\ -

Turn on your TV and switch its input source (using the Input , Source , or AV button on your TV remote) to match the port you used.

Occasionally, newer Blu-ray discs require updated software to play. Check the Bush support website for any available firmware downloads that can be installed via USB. 5. Troubleshooting Common Issues

Press or TITLE to open the DVD root menu. Use the arrow keys to navigate.

Connect the supplied mains AC adaptor to the DC INPUT socket (side of the unit) and plug it into a wall outlet. Bush Bdvd 8310 User Manual

This article serves as a comprehensive guide—a digital —to help you set up, operate, and troubleshoot your Bush BDVD8310 . 1. Getting Started with the Bush BDVD8310

Use the "Open" switch to pop the lid, insert your DVD, and press play. USB/SD Mode: If you’re watching digital files, press the DVD/USB/SD

Play, Pause, Stop, Fast Forward, and Rewind buttons are shared or duplicated depending on the active source. Turn on your TV and switch its input

Plug your external digital antenna (aerial) cable into the (RF IN) socket on the rear of the Bush unit.

If using HDMI, check that the cable is seated firmly. In the settings menu, ensure the audio output is set to "PCM" or "Bitstream" depending on your speaker setup.

10-inch (25.4 cm) TFT LCD widescreen with a resolution of 640 x 480 pixels. Battery Life: Built-in rechargeable battery providing approximately 2 to 3 hours of playback. Media Support: Connect the supplied mains AC adaptor to the

Before enjoying your media, it is important to understand the basic setup of the player. What’s in the Box? Bush BDVD8310 Portable DVD Player AC Power Adapter (Mains) Car Charger (12V) Remote Control User Instruction Booklet Initial Setup

The Ultimate Guide to the Bush BDVD8310: User Manual, Setup, and Troubleshooting

For support, visit www.bush-support.co.uk or call the Bush helpline.