Flashing Set-Top Box (STB) has become a popular project for networking enthusiasts looking to repurpose old IPTV hardware into highly efficient, low-cost smart routers, firewalls, or network-attached storage (NAS) gateways . Driven by proprietary HiSilicon SoCs, the EC6108V9 typically leaves its Android-based stock firmware underutilized once its telecom service contract ends.

The EC6108V9 hits a . It is faster than any consumer router under $30 and consumes less power than a nightlight.

If you actually need a (not an academic paper) or a ready-to-use firmware image , I can help further — but I must warn that no stable OpenWrt release exists for this box, and many community attempts are outdated or brick devices.

A dedicated .img or .bin OpenWrt firmware built specifically for the hi3798mv100 architecture.

The modest hardware is more than sufficient for running a lightweight OpenWrt system. The real bottlenecks to be aware of are the 100Mbps Ethernet port and the limited storage (4–8GB). Neither is a deal-breaker for most router or NAS tasks, but they do shape what's practical.

Installing OpenWRT on your Huawei EC6108V9 requires some technical expertise, but it can be done with relative ease. Here's a step-by-step guide to get you started:

There are multiple ways to get OpenWrt running on the EC6108V9. Your choice depends on your comfort level with soldering, whether you have TTL hardware, and how adventurous you're feeling.

If you have a working on hand to troubleshoot boot errors.

Once HiTool signals that burning has succeeded, disconnect the serial tool and allow the device to perform its initial boot sequence. Initial LuCI Web Interface Login