Historically, changing an IMEI required flashing custom modems, using specialized hardware boxes (like Z3X or Octoplus), or editing deep system files in the /system or /vendor directories. These methods frequently resulted in "hard bricking" devices or breaking the Android Verified Boot (AVB) chain.
Changing an IMEI is illegal in many jurisdictions. These steps are for educational purposes IMEI repair
After typing su to get root access, users sometimes use serial commands like: echo 'AT +EGMR=1,7,"YOUR_NEW_IMEI"' > /dev/pttycmd1
Grant the permanent superuser permission prompt when requested by the Magisk app. Step 2: Command Execution (Device Specific)
Always perform a full Nandroid backup and specifically back up your EFS partition , which contains your original IMEI data. Method 1: Using Magisk Modules (The Easiest Way) change imei with magisk
Changing an IMEI is not without risks, even with the safety of Magisk.
If your network bars disappear after the reboot, the string you entered failed the network's internal Luhn algorithm check, or the carrier blocked the spoofed profile. Revert to your original backup immediately. Changes Disappear After Reboot
How to Change Your IMEI Using Magisk: A Complete Technical Guide
Open the LSPosed manager app (which appears in your app drawer or via a notification). These steps are for educational purposes IMEI repair
| Aspect | Rating (1–5) | |--------|--------------| | Ease of use | ⭐⭐⭐ (requires terminal or module config) | | Effectiveness | ⭐⭐ (modem-dependent) | | Safety (brick risk) | ⭐⭐⭐⭐ (low, thanks to Magisk) | | Legal risk | ❌ (do your own research) |
Note: Depending on your specific MediaTek chip architecture, the terminal path /dev/pttycmd1 may vary (e.g., /dev/radio/atci ). Step 4: Verify and Reboot
Using Magisk to change an IMEI systemlessly is a highly sophisticated way to manage device privacy and test mobile applications. While it keeps the physical partitions safe from permanent damage, it requires a solid understanding of Android’s structural frameworks (Zygisk and LSPosed). Always maintain an unaltered backup of your device's EFS partition, and ensure that any modifications you perform stay strictly within your local legal regulations.
I can provide tailored instructions for your exact device configuration. Share public link If your network bars disappear after the reboot,
Enable Zygisk within the Magisk app settings and reboot.
Commands are sent directly to the radio interface (e.g., AT+EGMR=1,7,"NEW_IMEI" ) via a rooted terminal emulator.
Reboot your phone. Once it turns back on, open your phone dialer and type *#06# to check if the modification was successful. Method 3: Using Magisk with Diag Mode (Qualcomm Devices)
: There are various Magisk modules (like "IMEI Changer" or "Xposed IMEI Changer") that attempt to "mask" the IMEI. These often work at the software level, meaning the system