Equatech Universal Tv Wall Mount 32 To 100 Instructions ❲HD 2026❳

: Try the provided M4, M6, and M8 screws by hand to determine which thread size matches your TV's mounting holes.

This mount is designed for wood stud, solid concrete, or brick walls. Do not install into drywall alone.

: With the help of an assistant, lift the television up to the wall plate. Tilt the top of the TV slightly toward the wall and hook the upper notches of both vertical TV brackets securely over the top lip of the mounted wall plate.

This is the moment of truth. Get your helper ready. equatech universal tv wall mount 32 to 100 instructions

The Equatech kit includes a variety of bolt diameters (M4, M6, M8) and lengths.

Hand-test the provided screws (M4, M5, M6, or M8) in your TV's mounting holes to find the correct thread diameter. The screw should thread in smoothly without forcing. Determine if Spacers are Needed:

Use a stud finder to locate the edges and center of two studs, typically spaced 16 inches apart. : Try the provided M4, M6, and M8

When cleaning the back of your television or dusting the mount, do not use chemical sprays that could drip onto the locking mechanism or degrade the metal components. Use a dry microfiber cloth.

However, a wall mount is only as good as its installation. Poorly mounted large TVs are a safety hazard, leading to damaged walls, broken screens, or serious injury.

If your mount has a locking bar or padlock hole, install it to prevent theft or accidental unhooking. Also, attach the anti-tilt brackets if provided—these small screws at the bottom of the wall plate prevent the TV from being lifted off. : With the help of an assistant, lift

Equatech includes a paper template or cardboard guide. Tape it to the wall at your marked height, aligning the holes with stud centers. Use a level to ensure it’s straight. Mark all bolt holes through the template.

: Check the hardware alignment every six months to verify that no structural shifting has occurred, especially if you are utilizing a full-motion articulating arm configuration.

Lay a soft blanket or foam packaging on a flat, sturdy table or on the floor. Carefully place your television screen-face-down onto the protected surface.

Hook the top lip of the vertical TV brackets securely over the top rail of the installed wall plate.

This guide provides comprehensive, universal instructions for installing a heavy-duty TV bracket on wood studs or solid masonry. It covers everything from checking hardware compatibility to making final alignment adjustments. 🛠️ Required Tools and Components