The National Map
| ArcGIS REST Services Directory |
| Home > services > USGSNAIPImagery (ImageServer) | Help | API Reference |
| JSON | SOAP | WMS | WCS |
A built-in programmer or an optional handheld device is used to configure parameters. 3. Programming and Calibration
To operate, configure, and maintain this equipment safely, engineers and technicians rely heavily on the official Lahti Precision TPL-400 manual Go to product viewer dialog for this item.
This article serves as an overview of the technical specifications, installation procedures, and operational principles for the Go to product viewer dialog for this item. 1. Overview and Key Features of the Go to product viewer dialog for this item. Go to product viewer dialog for this item.
or alternative strain-gauge configurations. Operators must map the bridge wires (Excitation +, Excitation -, Signal +, Signal -, and Shield) to the marked input block to eliminate electronic signal noise. Analog and Relay Outputs lahti precision tpl400 manual
Your best chance of getting the correct official manual is to go through official commercial channels or the manufacturer.
Connect the TPL400 chassis ground to a clean, dedicated industrial ground earth.
Verify that the isolated analog grounding line is running completely separate from high-current AC ground networks. Relay Fails to Trigger A built-in programmer or an optional handheld device
Compatible with all types of strain gauge load cells.
+------------------+ +------------------+ +------------------+ | Clear Scale | | Apply Test Load | | Set Scaled Range | | (Zero Reference) | --> | (Known Weight) | --> | (Analog Outputs) | | Save Zero Pt | | Save Span Pt | | Save to Memory | +------------------+ +------------------+ +------------------+
Features an internal resolution of 130,000 and measurement speeds ranging from 10 to 80 readings per second. Power Options: This article serves as an overview of the
The Lahti Precision TPL400 supports both physical weight calibration (Deadweight Calibration) and electronic calibration (Theoretical Calibration) via known load cell parameters. Step-by-Step Deadweight Calibration
Run a shielded cable from the strain gauge load cell to the internal terminal strip.
Complete Technical Guide & Operations Manual for the Lahti Precision TPL-400 Digital Load Cell Amplifier
: Clear all material from the scale structure. Once the weight reading stabilizes, execute the zero calibration step ( P1 ). The transmitter logs the current millivolt per volt (mV/V) signal into the non-volatile memory as the absolute zero baseline.
The TPL400 manual states max label length is 39 inches. However, with the Q (Set Label Length) command, you can print continuous banners up to 60 inches if you disable the gap sensor.
