Used in rack-mount equipment where power density is critical. Design Benefits
| Parameter | Min | Typical | Max | Unit | | :--- | :--- | :--- | :--- | :--- | | | 9 | 12/24 | 36 | V DC | | Power Consumption (Idle) | 0.8 | 1.2 | - | W | | Power Consumption (Full Load) | 1.8 | 2.2 | 2.5 | W | | Reverse Polarity Protection | Yes (Built-in diode) | - | - | - |
The Abletec C1 series features a dual-purpose pin header block that segments high-power outputs from highly sensitive analog inputs. ableteccom c1 datasheet
50kΩ (unbalanced RCA); 100kΩ (balanced XLR). 2. Physical & Build Data
175W per channel into 8Ω; 330W per channel into 4Ω. Frequency Response: 20Hz – 20kHz. Bandwidth (1W): 2Hz – 180kHz (-3dB). Used in rack-mount equipment where power density is critical
For more information on the ABLETEC COM C1 datasheet, please refer to the following resources:
Before diving into the raw specifications, it is essential to understand what the Ableteccom C1 is and where it fits in the industrial landscape. The C1 is a designed for bridging legacy systems with modern IoT (Internet of Things) protocols. Bandwidth (1W): 2Hz – 180kHz (-3dB)
If you need to move forward with sourcing or integrating this IC, let me know:
The ABLETEC COM C1 is a compact, high-performance computer module that combines the benefits of a single-board computer with the flexibility of a COM (Computer-on-Module) design. This module is built around a robust processor, ample memory, and a rich set of interfaces, making it an ideal solution for applications requiring high processing power, low power consumption, and small form factor.
A safety warning from a DIYer: The heatsink bar on Abletec's associated power supply modules may not be electrically isolated from some components. If you do, you risk creating a dangerous short circuit or receiving an electrical shock.
| Parameter | Value | Details | | :--- | :--- | :--- | | | ~300W | This is into a 4Ω load. It's important to note that this is a maximum figure, and the actual power will depend on the overall system design and signal source. | | Supply Voltage (Rail) | ±53V DC | The module requires a dual-rail power supply, typical for many high-quality Class-D amplifier designs. | | Peak Current | 8.5A | The peak current draw for very short (e.g., 10ms) musical transients. | | Idle / Low-Voltage Rails | 5.6V & 7.5V | These pins are necessary to power the module's control circuitry. An external load is required on these pins for stable operation (detailed in the Setup Guide section). |
