You need a Raspberry Pi or an old laptop/thin client to run it. 2. Marlin (Custom Builds): The Reliable Classic
Which does your printer have? (e.g., Robin Nano v1.2, v1.3, or v3.0)
Look for configurations by users like Foxies or TinyTree on GitHub. These are pre-tuned specifically for the Sapphire Pro’s CoreXY kinematics. Key Features to Enable: Linear Advance: Essential for sharp corners.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Two Trees Sapphire Pro, 3D printer custom firmware ⚙️ two trees sapphire pro firmware best
Before diving into the firmware options, it's crucial to understand what you're working with.
Uses an STM32F103 processor. It is a 32-bit board but has limited flash memory.
Are you currently experiencing a specific problem (e.g., )? You need a Raspberry Pi or an old
Real-time flow rate adjustment, improved PID tuning, and easier manual leveling. B. Klipper Firmware
If you do not want to buy or configure a Raspberry Pi, a custom compile of is your best alternative.
If you want to unlock the full potential of your machine, upgrading the firmware is the single best modification you can make. 1. Klipper: The Gold Standard for Speed This public link is valid for 7 days
Reduces ghosting and ringing at high speeds.
Start around 415 steps/mm and calibrate from there. Klipper Rotation Distance: Start around 7.71 and fine-tune. How to Flash the Firmware
No need to recompile; you just edit a text file and restart.