Olympus's proprietary optical imaging technology that enhances the visibility of vessels and other tissues on the mucosal surface.
Clean the electrical contacts with 70% isopropyl alcohol. If the issue persists, use a multimeter to check continuity across the front socket ribbon cable or replace the internal connector board. Error Code: E204 – Light Source Overheating
Explicit instructions on opening the unit, replacing the LED module, replacing circuit boards, and handling delicate components.
Performing white balance adjustments (as shown in standard color chart output, Chapter 4). olympus cv170 service manual pdf
For technical inquiries or to request official documentation, call Olympus America Support at 1-800-848-9024 .
For clinical engineers, biomedical technicians, and medical equipment managers, having access to and understanding the is essential. This comprehensive technical guide covers maintenance protocols, error resolution, and system architecture to ensure optimal patient safety and equipment longevity. 1. Overview of the Olympus CV-170 Optera System
If fuses are intact, open the chassis and measure the output voltages originating from the Power Supply Unit (PSU) board using a digital multimeter to ensure they match internal rail requirements (e.g., +5V, +12V). Issue 2: "Scope Not Recognized" or Missing Video Signal Error Code: E204 – Light Source Overheating Explicit
Features Narrow Band Imaging (NBI) and Close Focus technology to enhance mucosal morphology visualization.
The CV-170 is a compact unit (295 x 145 x 425 mm) weighing approximately 11 kg. CV-170 VIDEO SYSTEM CENTER Instructions March 2016
Unlike user manuals that focus on operation (connecting scopes, adjusting brightness), the Service Manual is restricted to technical personnel. It contains critical information unavailable to the general public, including: For clinical engineers
Supports both specialized HD gastrointestinal/colonoscopic scopes and smaller video scopes used in ENT, urology, and bronchoscopy.
The system shuts down or the light source turns off automatically.