Everstart 6811a Smart Charger Manual 2021

The EverStart 6811A is a microprocessor-controlled "smart" charger. According to the 2021 manual, its standout features include:

Once connected, the charger will automatically begin charging.

| Light/Icon | Color | Meaning | | :--- | :--- | :--- | | | Green | Charger is plugged into AC outlet. | | Standard | Yellow | Mode ready for flooded/wet batteries. | | AGM | Yellow | Mode ready for Absorbent Glass Mat batteries. | | Gel | Yellow | Mode ready for Gel cell batteries. | | Deep Cycle | Yellow | Mode for marine/trolling batteries. | | Reverse | Red | Clamps are connected backwards. Swap immediately. | | 25% / 50% / 75% / 100% | Green | Flashing = Charging. Solid = Charge complete. | | Check Battery | Red | Voltage too low (<3V) or bad cell detected. | everstart 6811a smart charger manual 2021

BATTERYcare FAQ: What do the error codes “ER1” and “ER2” mean?

Attach the clamp to the negative terminal (or a clean, unpainted part of the vehicle chassis if the battery is still in the car). Power On : Plug the charger into a standard 120V AC outlet. | | Standard | Yellow | Mode ready for flooded/wet batteries

If the battery is below a certain voltage threshold, the smart charger may not start charging.

EverStart 3A Portable Smart Battery Charger and Maintainer (6811A) Go to product viewer dialog for this item. | | Deep Cycle | Yellow | Mode for marine/trolling batteries

If the display is flashing or showing an error, ensure the clamps are securely connected and the battery is not damaged. 5. Technical Specifications (2021 Model) Amperage: 3 Amps Voltage: 6V / 12V DC Input: 120V AC, 60Hz Weight: Approximately 1.06 lbs For more specific information on the Everstart 6811A Go to product viewer dialog for this item.

If the charger detects an issue, the LCD screen will flash an error code:

Maximizing Your Battery Life: The Everstart 6811A Smart Charger Guide

to the negative (-) terminal or a clean part of the vehicle chassis away from the battery and fuel lines.