(Early 1943–Mid 1943): The logo was reduced in size. The text remains the same as Type 1 but occupies a smaller footprint on the slide.
Some examples of trigger guard assembly marks seen on documented Remington Rand pistols include "L" and "2" on the right side, "8" on the left, and "0" and "V" on the right side trigger guard.
After a plant shutdown and reorganization in May 1943, Remington Rand resumed production with a simplified serial number format lacking the "NO." prefix. remington rand 1911a1 markings
Type 1 (Early 1942 - 1943) [REMINGTON RAND INC.] -> [SYRACUSE, N.Y. U.S.A.] Type 2 (Mid 1943) [REMINGTON RAND INC.] -> [Syracuse, N.Y. U.S.A.] (Changed to lowercase letters) Type 3 (Late 1943 - 1945) [REMINGTON RAND INC.] -> [DIV. OF MANUFACTURE] -> [SYRACUSE, N.Y. U.S.A.] Type 1 Roll-Mark (Early Production)
, the Rochester Ordnance District inspector responsible for Remington Rand and Ithaca production. P Proof Mark: (Early 1943–Mid 1943): The logo was reduced in size
The frame of a USGI 1911A1 is covered in small but critical markings, each with a specific meaning. These marks are the government's quality control system etched into the metal.
The right side of the frame is roll marked with above the serial number, with "M 1911 A1 U.S. ARMY" appearing on the frame extension below. These markings are essential for military contract authentication; their absence or incorrect font should raise immediate suspicion. After a plant shutdown and reorganization in May
Remington Rand did not manufacture its own barrels. Instead, they sourced them from subcontractors. Authentic barrels will feature specific stamps on the lugs or the chamber:
Every pistol underwent rigorous military inspection. The initials of the Ordnance District’s commanding officer were stamped onto the left side of the frame, near the magazine release. Ordnance Inspector Marks
