A: No. You only need the USB driver if you are using the USB Slave port for direct cable download. For Ethernet, TCP/IP is used. However, USB offers a simpler low-level connection without network IP conflicts.
MCGS HMIs use standard USB cables to connect to development PCs running MCGS configuration software (such as MCGS Embedded Version or MCGS Pro).
The MCGS HMI USB driver is a software component that allows Windows operating systems to recognize Kunlun Tongjie touch screens. When you connect the HMI to your computer via a USB cable (typically a Type-B or Mini-USB cable), this driver bridges the hardware gap. Key Functions
The primary purpose of the MCGS USB driver is to facilitate direct "online download" of engineering configurations via the (often marked as USB2 on the device). When you compile a screen project in the MCGS software, the driver ensures the computer can communicate correctly with the HMI. For newer Windows operating systems like Windows 10 and Windows 11, correct driver installation is the most common technical hurdle, mainly due to Microsoft's driver signature enforcement security policies. mcgs hmi usb driver
Getting your functioning perfectly is the gateway to efficient project deployment. By downloading authentic software, understanding Windows Device Manager paths, and accounting for modern operating system security features like Driver Signature Enforcement, you can quickly eliminate connection errors and focus on building robust HMI applications.
| Problem | Likely Fix | | :--- | :--- | | "No device found" in software | Change USB cable (must support data, not charge-only). Try a different USB port (USB 2.0 preferred). | | Driver installs but HMI reboots repeatedly | Power the HMI from an external 24V supply, not USB bus power. | | Error: "Download failed – USB timeout" | Disable antivirus/firewall temporarily. Close other software using COM ports. | | Windows 11 fails to install | Use the driver from EasyBuilder Pro V6.01 or newer – older MCGS drivers are not Win11 signed. | | Weinview HMI not recognized | In EasyBuilder, go to – if still fails, install the "USB Sync" driver from Weinview website. |
Ensuring your HMI runs the latest system software. However, USB offers a simpler low-level connection without
Remember these key takeaways:
Do not run from a ZIP folder. Extract to C:\MCGS_Driver\ .
In the world of industrial automation, few names are as trusted as MCGS (Monitor and Control Generated System) for human-machine interface (HMI) solutions. For engineers and technicians working with MCGS-powered devices like the TPC series—from the rugged 7062TX to the high-performance 7062TD and the versatile 1061Ti—the USB driver is a small but essential piece of software that bridges the gap between your computer and the HMI touchscreen. When you connect the HMI to your computer
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
A technician installs the driver, sees "MCGS USB Device" in Device Manager, but MCGS software says "Port not found." The driver may have installed as a "USB Test and Measurement Device" not as a COM port. Uninstall the device, check "Delete driver software," then reinstall using the manual .inf method targeting the correct hardware ID.
Download the latest version of or MCGS Embedded Software .
What exact or behavior are you seeing in the MCGS software? Share public link