Adjustment Program Epson Px660 'link' Access

This occurs when the software cannot detect the printer. Check your USB cable connection, ensure the printer is fully powered on, and verify that no print jobs are stuck in the Windows print queue.

| Error Code/Message | Meaning | Solution | |---|---|---| | / Service Required | Waste ink counter has reached maximum | Reset waste ink counter using Adjustment Program | | Error Code: 21000012c / 20000107 | Communication error - multiple printers detected | Disconnect all other printers and ensure only the PX660 is connected | | Error Code: 21000068 | Communication error | Update printer firmware; check USB connection; try different USB port | | "Ink Pad needs maintenance" | Waste ink counter nearing limit | Reset counter or replace pads if physically saturated | | Printer not detected | Connection or driver issue | Check USB cable (ensure data transfer capable); reinstall drivers; try different USB port | | Program won't run | Compatibility or permission issue | Run as Administrator; try Windows Compatibility Mode (Windows 7) | | Antivirus blocks program | False positive detection | Temporarily disable antivirus; add exception for program folder |

A: Not necessarily. The error is triggered by the counter, not physical pad saturation. However, it's recommended to replace pads or install an external waste tank after multiple resets. adjustment program epson px660

However, this tool can do much more, including:

Click on . This is the preferred method for most users, allowing direct access to specific functions without going through the full guided service sequence. This occurs when the software cannot detect the printer

Once the program opens, it should detect your printer model and the USB port it is connected to. Select the correct model and port from the dropdown menus.

If you reset the counter and continue printing heavily without addressing the physical pads, the ink will eventually oversaturate the foam and leak out of the bottom of your machine. To prevent this, you have two options: The error is triggered by the counter, not

Replace waste ink pads when:

Once the reset is complete, turn off your printer, wait a few seconds, and turn it back on.